An anti-static wrist strap is used to discharge static electricity from the human body. It consists of anti-static elastic band, movable snap button, spring cord. Protective resistor and plug or collet.
The inner layer of the elastic band is woven with an antistatic yarn, and the outer layer is woven with ordinary yarn. Main indicators Spring cord maximum length 250cm Leakage resistance 106Ω (guarantee
Protection resistor 106Ω). Corded, cordless anti-static wrist strap, static ring Wired wrist strap (anti-static) wireless electrostatic wrist strap, anti-static wrist strap details
The wireless electrostatic wristband is based on the physical principle of (static voltage balance). According to the "electrostatic engineering", the static electricity is the method of pushing between ions.
The principle of transmission has been developed. The static electricity is pushed from the high-voltage self-high potential to push the human body electrostatic ions into the design of the drought (the collection area).
[Charge of charge induction] will make the front and back surfaces of the conductive plate carry the "equal isotropic charge"-skin effect, due to the built-in ion exchanger in the region
Free energy characteristics>, can easily provide the same amount of electrostatic ions introduced into the neutralization of the charge to neutralize, so the effect of static discharge can be achieved, and the outside of the machine
There is a screw that is connected to the inner conductor loop.
(1) It can be used as a person to improperly touch the high static power supply, causing a large amount of static charge to be introduced instantaneously. When the ion is not finished, the external space can be borrowed by the same screw.
The gas-water molecules provide ion neutralization (which is the Corona discharge effect), which effectively eliminates static electricity and achieves the ultimate goal of electrostatic discharge (static voltage balance).
(2) This screw can be used for potential zero return function (just touch the screw to ground).
(3) It can be used as a loop detection terminal.
The wired grounding wrist strap is the most basic and most commonly used product in the anti-static equipment. It is not only easy to set up and operate.
It is also the most cost-effective in terms of price. The reason is that the static electricity on the human body is discharged to the earth through the wristband and the grounding wire. Therefore, the wristband must be surely used when used.
For skin contact, the grounding wire should also be grounded directly, and ensure that the grounding wire is unobstructed to maximize its effectiveness.
Anti-static wrist strap, commonly known as electrostatic ring, is a device that is worn on the wrist of a human body and vents the body to accumulate electrostatic charge. It is divided into a wired type, a wireless type, and has a metal ring.
Mixed loop with elastic conductive wire. This product belongs to the anti-static wrist strap buckle adjustment wire type, which can effectively protect the zero-resistance parts from the interference of static electricity.
Used to discharge static electricity from the human body. It consists of an anti-static elastic band, a movable snap, a spring cord, a protective resistor and a collet. Antistatic yarn for the inner layer of the elastic band
Weaving, the outer layer is woven with ordinary yarn. The principle of the anti-static wired wrist strap is to guide the static electricity of the human body to the earth through the wrist strap and the grounding wire. Wrist strap and skin when in use
Contact and ensure that the ground wire is grounded directly for maximum efficiency. Put on this anti-static wrist strap, which can safely remove the body within 0.1 seconds
The static electricity generated, the wrist strap is the most basic and most commonly used in anti-static equipment.
