Anti-static rubber mat application range and precautions
Scope of application
In the micro-electronics industry, such as electronic semiconductor devices, electronic computers, electronic communication equipment and integrated circuits, the production workshops and advanced laboratories need to lay anti-static mats or anti-static mats to reduce or eliminate static hazards. After the floor mat is laid and grounded, the working surface will discharge the static electricity of the human body, so that the ESD tweezers, tools, instruments, instruments, etc. that the human body is in contact with the table top reach a substantially uniform potential, so that the electrostatic sensitive device (SSD) is not subjected to triboelectric charging. The interference of the wide step band caused by the electrostatic discharge phenomenon, thereby achieving the effect of electrostatic protection.
Precautions when using
1. The surface of the product is strictly prohibited from contact with acid-alkaline solvents (such as benzene, alcohol, etc.), which may cause discoloration, fading and resistance degradation of the surface of the product. If cleaning is required, the cloth may be wiped with a neutral solution (such as water).
2. The glue used should be compatible with the bottom of the rubber pad product and the material of the worktable. It is not only firmly bonded, but also does not shrink after the product sticks. It is recommended that the test be pasted before mass production.
3. Product shrinkage: The product contains more glue than the general table mat, the durability is increased, and the tensile strength is increased. It is recommended that the product specifications be extended and relaxed during the cutting, and stored for 24 hours, so that the product has a fatigue recovery process, and then Glue bonding production.