Anti-static table mat ROHS test report
In order to allow customers to purchase environmentally-friendly anti-static mats more confidently, our company will send samples of green anti-static mats this year. After testing by third-party testing agencies, we will confirm that the third-party testing agency has issued ROHS testing reports and order anti-static mats. Look for Hyvida 2MM green.
Anti-static mats in the electronics manufacturing industry, the laying of countertops, the demand for the ground is rising, in order to meet the environmental requirements of anti-static mats in various industries, the development of odor-free mats, suitable for closed workshops, anti-static mats to For effective grounding, the specific installation details are as follows:
When installing an environmentally-friendly anti-static mat, you need to connect the anti-static grounding buckle to the static grounding bus (the grounding bus must meet the standard). You can not connect to the grounding wire of the equipment or the ground of a three-phase circuit. The grounding wire has different functions and cannot be mixed. Regardless of the grounding wire of the device, or the lightning protection ground wire or the lighting ground wire, they all have their own balance points. Therefore, the grounding buckle of the workbench must be connected to a special anti-static grounding. Static electricity can be effectively discharged from the line. If it is not grounded as required, it may have a certain impact on the safety of employees.
Microelectronics industry, electronic computer equipment, electronic communication equipment and integrated circuits, microelectronics industry, storage and production workshops for inflammable and explosive materials, high-demand laboratories, various laboratories, server rooms, power distribution rooms, etc. In order to reduce or eliminate the influence of static electricity, it is necessary to lay anti-static mats and floor mats. When the anti-static rubber is laid and grounded, the working surface will discharge static electricity from the human body, so that the human body and the table top are in contact with ESD scorpions, tools and appliances. The meter and the like reach a substantially uniform potential, so that the electrostatic sensitive device is free from the interference caused by the electrostatic discharge phenomenon such as triboelectric charging, thereby achieving the effect of electrostatic protection.
The anti-static rubber table mat is mainly made of anti-static conductive material and synthetic rubber which dissipates static electricity. Commonly used thicknesses are 2MM, 3MM thick double-layer composite structure, the surface layer and the bottom layer are both 1:3 ratio, that is, the thickness of the static dissipative layer and the static conductive layer.