Anti-static trolley
Anti-static trolley for manual access to lighter cargo, can be used with plastic crates to store a variety of small products, widely used in the electronics industry and small parts warehouse, can be used in warehouses, archives, offices, shops, etc., can be changed Spraying powder or laying special rubber sheets to achieve anti-static function, featuring low cost, safety and reliability, simple assembly and disassembly, anti-static shelves can be used alone or freely spliced into various arrangements.
Anti-static trolley layer material is carbon steel chrome mesh, stainless steel mesh, stainless steel flat plate; single layer maximum load capacity 200KG; pillar: height optional, diameter 25.4mm, optional U-shaped handrail or column; optional: grounding chain ( Strengthen anti-static effect); side net (to prevent objects from slipping); clip: ABS plastic clip; each layer of wire mesh uses a pair of metal clips to make the anti-static conduction system more perfect, * surface resistance: 105-108Ω Can be customized to any length, width, height and number of layers; the height of the laminate can be adjusted, the standard length of the mesh is up to 1800MM, the width is the widest 600MM, the standard flat screen can be used, and the reverse net can also be used.
Professional quality, to meet your highest requirements - smooth and easy to maintain, all angles are clearly visible wire mesh, no weight effect on the weight, no deformation, shock, scratch, no rust It is not easy to be attacked by grease and most acid and alkali. It can be used according to demand. It is suitable for room separation and display various attractive items. S hooks are used to connect supporting shelves and complete sets of shelves, which can effectively utilize space. Each of the matching shelves and optional shelf attachments are equipped with 2 S hooks. When the S hook is used, the maximum load of the shelf is reduced to 100kg. It can be built without tools. Just a rubber hammer that protects the height adjustment screw. It can be moved by a universal caster with or without brakes. With casters.
The maximum load referred to in the parameters is the uniform distribution of the goods. Adding supporting shelves shall not exceed the maximum load-bearing capacity of the bracket and the maximum load-bearing range of the universal casters. Line net shelf Up and down height adjustment is 25mm per block. It is made of 4.7mm thick steel mesh (maximum load 150kg) or 62mm thick steel mesh (maximum load 200kg). The three layers are nickel plated and the surface is chrome plated. Shelf column, 25mm diameter 2 part, can be easily connected by screws. The three layers are nickel plated and the surface is chrome plated. It has a nut and a height adjustment screw that can compensate for uneven ground up to 20mm. The columns between the two shelves can be connected by a column connector. The distance between the two shelves is 15mm.
Anti-static cart, armrest optional cable net shelf height adjustable. 4 universal casters, 2 with double brakes, solid rubber tires, tire diameter 100mm, easy to clean, smooth surface, shockproof, friction resistant, corrosion resistant. It is shipped in an unassembled form and is easy to assemble.