Anti-static wrist strap manufacturers interpret the principle of double loop wrist strap
The product is provided with a snap on the outer side of the plastic block, and the snap is connected to the plastic web by the metal connecting piece and connected to the conductive webbing on the inner side of the plastic block to form two independent circuit loops, the plastic block is divided into left and right. Two pieces, two plastic blocks are hingedly connected to each other, and the snaps on the outer sides of the two plastic blocks are respectively connected with the respective grounding wire end buckles; the product is compared with the existing traditional wrist band, when the wrist band wearer is unaware Even if one loop fails, the other loop can continue to work, reducing the probability of electrostatic breakdown of the electronic component insulation layer, avoiding mass rejection or quality degradation, low cost of use, and extending the life of the wrist strap. Suitable for higher end customers.
Dual circuit wrist strap product features and parameters:
1. Double loop electron
2. Wrist ring: the rubber band can be adjusted;
3. Material: two plastic sheets (PA6);
4. Color: red and blue;
5. Wrist ring resistance: ≤103Ω;
6. Coiled wire: PU outer skin, inner package
7. Core copper platinum wire, 1MΩ resistor, two sets of grounding wire, full copper plug