Can the anti-static mat be cut?
As a safety protection product, anti-static mat is also mainly used for laying on the ground. The coil specifications at the factory are often not tightly laid in some corners. The anti-static mat needs to be cut, and the cutting method is also very Simple, just use a utility knife to cut along the line that needs to be cut at one time (try everything to the end, multiple cuts may cause burrs). However, it should be noted that any piece of anti-static mat, regardless of size, whether it is spliced with other anti-static mats or not, should be in direct contact with the grounded copper foil net to ensure that the static electricity generated in any place can be discharged to the ground in the first time in.
The anti-static mat provided by our company is sold directly by the factory, and it accepts special-shaped anti-static mats within 1.5mx1.2m in length and width. In addition, the color (except white, theoretically possible) and thickness (usually between 1mm and 5mm) are also available. Provide customized services.