Clean room sticky mat replacement cycle
Since the clean room has relatively high requirements for a sterile environment, according to the 6s standard of the clean room stipulated by the industry, a certain sticky dust mat needs to be laid at the entrance of the workshop to isolate various dust and bacterial microorganisms.
Sticky mats are used every day, how often do they need to be replaced?
The sticky pads are made of multiple layers of polyethylene film. Each layer has a high viscosity coating. It is smooth and durable, and can clean the dirt on the soles to keep the working environment clean. Sticky mats are widely used in cleaning areas and are placed at the entrance and exit of the clean room. It was the first dust cover in a clean room. When the sticky pad is used for a while, it becomes covered in dust and dirt.
How to Replace a Reusable Sticky Mat
Many people will tear off one layer starting from the corner tabs with a neat motion. This will cause the dirt and dust stuck to the mat to be shaken off carelessly, which will pollute the environment. The four corners of the sticky mat should be separated from the mat first, and slowly approach the middle, the dust and dirt will be wrapped inside, folded inward until it is small enough to be discarded. This operation will not cause secondary pollution.
How long does it take to replace a sticky mat?
According to the 6S standard of the clean room, different clean rooms can communicate with each other. Sticky mats should be placed at the lower height of the door and sticky mats should be placed in all air shower enclosures. The frequency of replacement is 2 times a day. Basically two layers are removed every day.