The dust-free cloth wiped the screen off. What caused this?
The dust-free cloth is made of 100% polyester fiber. The surface is soft, easy to wipe the sensitive surface, and the fiber is not detached. It has good water absorption and cleaning efficiency. Product cleaning and packaging are done in a clean room. Optional sealing of dust-free cloth generally: cold cutting, laser edge sealing, ultrasonic sealing.
Recently, many customers have received the phenomenon of dust-free cloth scratching the surface of the object during the process of using the dust-free cloth. So why is this happening? Let's take a look at it.
The material of the dust-free cloth is a very important factor. The material of the dust-free cloth varies widely. The ultra-fine type is generally nylon weaving; the sub-fine is generally nylon composite polyester; the polyester type is generally polyester fiber, compared with ultra-fine and imitation Ultra-fine models are called rough, ultra-fine and imitation super-fine fabrics are soft, feel good, and wipe is not easy to scratch products, and these two clean cloths are cleaned with 18MΩ ultra-pure EDI, at the most advanced level 100 Packed in clean room; hot-lined on four sides, reduced hair, fiber, low dust and low ion release. Excellent dust removal effect, combined with anti-static function; high water absorption, softness does not damage the surface of the object; provide sufficient dry and wet strength.
The dust-free cloth cutting method is another extremely important factor. Why do you say this? Dust-free cloth cutting, that is, the edge-sealing method will lead to the hard-edged phenomenon of the dust-free cloth. The laser edge-sealing is most prone to hard edges and dandruff. This is because laser cutting is an example, the cutting edge is hard and easy to deteriorate. Yellowing, causing pollution to the environment in which it is used. The hot wire cutting solves this problem very well, and the cleaned cloth without cutting has no yellow edges, no hard edges, no oblique edges and no oblique edges!
The high-grade microfiber dust-free cloth is made of 36 microfibers and is made of a coarse fiber with extremely high fiber density. The gap between the ultrafine fibers is between the diameter of the liquid water and the diameter of the gaseous water, so the ultra-fine fiber dust-free cloth can effectively prevent the penetration of water droplets and achieve high-efficiency gas permeability. The precision fiber structure used in the microfiber dust-free cloth has a larger specific surface area than the general fiber, has more contact with oily dust, and has stronger oil absorption ability, so it has good cleaning efficiency.