Electrostatic Treatment Of Anti-static Work Clothes

Feb 09, 2021 Leave a message

Electrostatic treatment of anti-static work clothes


The principle of anti-static work clothes is to prevent static electricity from accumulating on clothes. Anti-static work clothes refer to work clothes sewn with anti-static fabrics. Anti-static fabric is a fabric made of conductive fibers or anti-static synthetic fibers mixed or evenly mixed and interwoven at approximately equal intervals. Conductive fiber refers to the general term for fibers that are wholly or partly made of conductive materials or metal or organic sub-conductive materials, and their volume resistivity ρ v ~ is between 104 ~ 109ω/cm. According to the distribution of conductive components in the fibers, conductive fibers can be divided into three types: uniform conductive components, coated conductive components and composite conductive components.

At present, most antistatic fabrics are made of conductive fibers, especially composite fibers containing conductive components. Anti-static work clothes made by adding conductive fibers to chemical fiber fabrics are based on two mechanisms: charge leakage and neutralization. When grounded, the static electricity on the fabric can be neutralized by the corona discharge of the conductive fiber, or it can be discharged to the ground through the conductive fiber; when it is not grounded, the electricity is eliminated by the weak corona discharge of the conductive fiber. Practice has shown that anti-static work clothes can effectively suppress static electricity in clothing and eliminate or reduce the harm of electrostatic discharge.


When we clearly understand the anti-static principle of anti-static work clothes, we also know why the electronics factory requires employees to wear anti-static clothes. No matter you are the boss or employee of the company, you have the responsibility to think about the quality of the company's products, and you are obliged to follow the principles of ensuring the safety of the company.


The method to eliminate static electricity is as follows:

(1) Electrostatic grounding. Grounding is the simplest and most basic method to eliminate the hazards of static electricity. It is mainly used to eliminate static electricity on conductors, not on insulators. In order to eliminate static electricity on the conductor, the grounding resistance should be 1000 times. The electrostatic grounding must be firm and have sufficient mechanical strength.


(2) Humidification. Humidification is to increase the humidity of the air and eliminate the accumulation of static charges. In places with electrostatic hazards, if the process conditions permit, you can install air conditioning equipment, sprayers or wet cloth strips to increase the relative humidity of the air. From the perspective of eliminating the hazards of static electricity, it is more appropriate to keep the relative humidity above 70%. For places with electrostatic hazards, the relative humidity should not be lower than 30%.


(3) Add antistatic additives. The electrostatic additive is a special additive. Generally, only a few thousandths or one ten thousandths of a trace amount can be added to eliminate static electricity in the production process. Sulfonate, quaternary ammonium salt, etc. It can be used as an electrostatic additive for plastics and chemical fibers; oleate and naphthenate can be used as an electrostatic additive for unemployed petroleum; acetylene carbon ink can be used as an electrostatic additive for rubber unemployment. When using electrostatic additives, the principle of not affecting product performance should be adopted. In addition, care should be taken to prevent the toxicity and corrosiveness of certain additives.


(4) Static neutralizer. Static electricity neutralizers, also called static eliminators, are realized by means of electricity and ions. According to the working principle and structure, it can be divided into induction neutralizer, high pressure neutralizer, radiation neutralizer and ion current neutralizer.


(5) Process control method. There are many methods of process control, including the following aspects: correctly select materials with better conductivity; reduce friction speed or flow, change the fuel injection method (such as fuel injection from the bottom or along the tank wall) and the shape of the fuel injection nozzle; remove the oil Impurities mixed in the tank or pipeline; reduce the concentration of explosive mixtures.