How much is natural rubber sheet?
If the natural rubber sheet produced by our company wants to have great development, then the sensitivity to the market's insight must be very high. We must have a very clear understanding of the market. Only in this way can we have Maybe you can gain a foothold in the current market and have a place. Let's take a look at it.
Natural rubber sheets are widely used in substations, power plants, power distribution rooms, laboratories, and field live working operations. They are mainly made of rubber natural rubber materials, and there should be no harmful irregularities on the upper and lower surfaces. Harmful irregularity refers to one of the following characteristics, that is, defects that damage uniformity and damage the smooth contour of the surface, such as small holes, cracks, local ridges, cuts, inclusions of conductive foreign matter, creases, voids, undulations, and cast marks. . Harmless irregularity refers to the surface irregularities formed during the production process. The details are as follows:
1. Specifications of natural rubber sheet:
(1) According to the color can be divided into: black rubber pad, red rubber pad, green rubber pad
(2) According to the thickness can be divided into: 1 mm ~ 50 mm; width: 1000 mm ~ 2000 mm; length: according to customer requirements.
2. The scope and storage of natural rubber sheets:
Widely used in substations, power plants, power distribution rooms, workshop workbench, factory buildings, laboratories, and field live working.
Store in a dry, ventilated environment, away from heat, and away from the ground and walls more than 20cm. Avoid contamination by acids, alkalis and oils. Do not open the air to avoid direct sunlight.
3. Natural rubber sheet thickness:
More than 5 different points should be randomly selected on the entire natural rubber board for thickness measurement and inspection. Measurements can be made using a thousand heart liver or an instrument of the same precision. The accuracy of the micrometer should be within 0.02mm, the diameter of the drill should be 6mm, the diameter of the flat presser foot should be (3.17±0.25)mm, and the presser foot should be able to apply a pressure of (0.83±0.03)N. The insulating mat should be placed flat. Make the micrometer measurement smooth between the measurements.