How to extend the service life of ion fans
I believe that everyone has seen the ion fan, and has a certain understanding of its principle and function. In layman's terms, it is to prevent static electricity pollution and neutralize static electricity. It can be seen in some electronic production lines, maintenance stations and other personal electrostatic protection areas. Figure, today, the editor of Li Jingyi will talk to you about the daily cleaning and maintenance of ion fans, and explain the specific operation methods, as well as the cause analysis and maintenance instructions for some problems that may occur in the fan, so as to make the fan work performance Always in good condition, and maximize its service life.
When the ion fan is running, the dust in the air will be sucked into the fan along with the airflow, and adhere to the wind window, pin holder and other structural parts, especially on the live parts (such as the discharge needle), making the needle of the pot needle Passivation, the discharge effect is reduced, which seriously affects the working performance of the ion blower. The maintenance time can be set according to the following, and the host will automatically clean the discharge needle. If it is used for a long time, manual maintenance can be carried out regularly according to the actual situation.
Daily maintenance of ion fan:
First, clean the air intake screen and ionized air outlet to prevent dust and other debris from blocking air circulation. During use, we can add a streamer in front of the ion fan to check the operation of the fan. This is a simple and intuitive visual management;
The second step is to clean the ion discharge needle on the inner needle seat of the ion blower. Each shift allows employees to rotate the rotating cleaning brush of the ion fan more than three times. Of course, some ion fans are better for cleaning the discharge needles regularly, and there are some ion devices that do not have discharge needles.
Finally, according to the workload, use a cotton swab or an anti-static brush to clean the ion discharge needle. Dip alcohol to clean the ion discharge needle. Please note that you cannot use water and natural wax to clean it. In the cleaning process, it is particularly important to disconnect the power before cleaning. Usually, the factory will clean the insulator around the electrode needle and the dust on the discharge needle according to the environment and usage conditions, so as to prevent the insulation performance of the surface of the machine itself and the moisture absorbed by it from deteriorating. The correct maintenance and cleaning method can extend the service life of the ion fan.
If you want to extend the life of the ion blower and keep its performance in the best condition, it is necessary to perform regular and correct maintenance of the ion blower according to the actual situation.