How to install the ion fan?
Installation method of ion fan 1. Installation of horizontal ion fan Place the horizontal ion fan on the table, plug in the power source, turn on the ion fan, adjust the air flow of the ion fan to the required working area, and tighten the fastening nuts on both sides of the fan. You can start working. The horizontal ion fan can also be suspended. 2. Installation of desktop ion fan Hang the suspended ion fan at an appropriate height, adjust the air volume and direction to the desired position, and then start to work. If the ion fan is used in a particularly dirty environment, you can choose to install a filter.
How to make sure that the ion fan is working properly?
First of all, the initial check is that the fan does not rotate, and then to test whether it is qualified, it must be tested with an instrument. An instrument with a professional side ion fan 1! If there is no instrument, the more earthy way is to hold a screwdriver against the discharge needle and the other end against the casing. If there is a spark, then there is still high voltage. It is recommended that you use a professional instrument!
How to calibrate the ion blower?
With the anti-static test instrument, calibrate by adjusting the wind speed and wind direction. We recommend using the SIMCO FMX-004 electrostatic tester to test the ion fan.
