Instructions for use of anti-static work shoes
Anti-static work shoes are usually called static shoes and anti-static shoes. It is a type of work shoes because it can inhibit the dust generated by people walking in the clean room, and reduce or eliminate the hazard of static electricity. It is often used in electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits and other micro Electronic industry production workshops, pharmaceutical factories, food factories, clean workshops of electronics factories, laboratories, etc. Anti-static work shoes are made of PU or PVC material, which is a dissipative material.
Instructions for use of anti-static work shoes
1. Anti-static shoes are protective shoes that eliminate the static electricity of the human body and prevent electric shocks below 250V. This product is produced in accordance with the GB4385-1995 standard.
2. It is mainly suitable for preventing the burning and explosion of the human body from electrostatic hazards (such as the workplaces of petroleum, chemical, coal, printing, rubber, medical, purification, electronics and other industries)
3. Anti-static shoes and conductive shoes should not be worn with insulated woolen thick socks and insulated insoles at the same time. Anti-static shoes should not be used as insulated shoes.
4. The place where anti-static shoes are used should be anti-static ground, and the place where conductive shoes are used should be ground that can conduct electricity to achieve a good quality.
5. Anti-static shoes should be used in conjunction with anti-static clothing. Pay attention to the clean, waterproof and moisture-proof products.
6. The resistance test should be carried out within 200 hours during the wearing process. If the resistance is not within the specified range, it cannot be used as anti-static leather shoes. Anti-static shoes require resistance between 100K ohm and 100M ohm.