Ion fan ion output detection
How to detect the ion output of ion fan? We generally use an electrostatic tester to measure the ion output of an (ion fan). When using a 150mm x 150mm 20pF charging pad for each EOS/ESD standard, an electrostatic tester can be used to determine the specific discharge time. The 1000V-100V discharge time takes only a few seconds.
How to detect the ion output of ion fan? We generally use an electrostatic tester to measure the ion output of an (ion fan). When using a 150mm x 150mm 20pF charging pad for each EOS/ESD standard, an electrostatic tester can be used to determine the specific discharge time. The 1000V-100V discharge time takes only a few seconds.
If an electrostatic tester cannot be provided, the ion output (case) can also be verified by a pocket-type electrostatic tester. The specific procedure is as follows:
1. Take a piece of plastic cloth and rub the plastic sheet with the rubber until static electricity is measured with an electrostatic tester.
2. Turn on the static ion fan power supply and set the wind speed to high speed.
3. Place the static-charged plastic sheet 300mm away from the center ion outlet for 5 seconds.
4. Remove the plastic block from the ion stream and measure the amount of static electricity remaining. The plastic static electricity was finally discharged.