The ion air gun is a kind of static eliminator. It belongs to the manual operation and movable dust removal equipment. However, during use, the user may easily encounter the following misunderstandings when selecting and using:
Misunderstanding 1: The dust can not be removed is the quality of the ion air gun. Just now we talked about the dust particles are divided into dry particles and mixed oil particles dust. The dry particle dust is very good with the ion wind gun. After the static electricity is removed, A small amount of air can blow off the dust. If it is oily particulate dust, it is blown with an ion wind gun, and the dry dust attached to the oily particles is blown off. The oily particles dust remaining on the surface of the product must be wiped with a dust-free cloth and an appropriate amount of drops to solve the problem. .
Myth 2: The wind speed is much faster. The average customer thinks that the faster the wind speed, the larger the air volume, the better the dust removal effect. In fact, this view is mainly psychological and is not correct. It depends on the environment and product shape used. If it is in a clean environment, the product is very regular and flat, in fact, only a small amount of air volume can be achieved. Because in 
this environment, the object of dust removal mainly settles automatically, the external pollution source is non-oily particle dust, and the product surface forms an inclination angle of 30° with the airflow surface, which can be formed by one blow. On the contrary, the harm caused by the large amount of gas and the fast flow rate is to change the direction of the airflow in the clean room. The indiscriminate blowing causes a large area of dust pollution, and the product quality is difficult to control.
