Operation and installation of ion wind nozzle in addition to static electricity and dust
Ionizing nozzle for removing static electricity and dust: It is a fixed installation special equipment for removing static electricity. It uses a kind of antistatic product in the compressed air series. First, insert the end of the nozzle cable into the high voltage output jack of the high voltage generator and rotate it clockwise. At the end, connect the grounding wire of the ion wind nozzle to the grounding pole on the outside of the high-voltage generator, and after confirming that the grounding is good, insert the plug of the high-voltage generator into the socket with the grounding wire (note the use of the high-voltage generator) Voltage), the ion wind nozzle is connected to the compressed gas, and the power supply of the high-voltage generator is turned on to work.
Points to note when using ion wind nozzles:
1 Read the operating instructions before installation and operation.
2 It must be grounded reliably before operation.
3 Do not operate the ionizing nozzle in a flammable and explosive environment.
4 Do not make fine repairs without authorization.