Principles And Precautions Of Anti-static In Clean Rooms

Jan 20, 2021 Leave a message

Principles and precautions of anti-static in clean rooms


Accidents caused by static electricity in a clean room have the following aspects:

1. Electrostatic electric shock caused by static electricity can cause people's anxiety and fear, and may cause secondary injury (for example, a person falls due to electric shock, and is injured by falling); 2. Discharge current caused by electrostatic discharge can be Lead to damage and damage to semiconductor components. For example, if 50 P-MOS circuits are placed in a plastic bag and shaken several times, 39 pieces will be severely broken down, with a failure rate of 78%. This is because semiconductor devices Very sensitive to electrostatic discharge;


3. Electromagnetic waves generated by electrostatic discharge can cause noise in electronic instruments and devices; 4. The luminescence of electrostatic discharge can cause damage to the photosensors such as photographic limbs; 5. The mechanical phenomenon of static electricity can cause the mesh to be blocked by dust and spinning yarn Chaos, uneven printing depth and product contamination;


6. The most dangerous disaster caused by electrostatic discharge is the explosion caused by the fire source well that becomes combustible. For example, according to foreign literature statistics, out of 86,000 explosive anesthetics used in the operating room, 36 explosions were caused, of which 21 were caused by static electricity. ; Static electricity accidents mainly lie in the generation and accumulation of static electricity, and the flow of airflow, the friction between the airflow and the pipe, the tuyere, the filter, the friction between the human body and the clothes, the friction between the clothes, the grinding, spraying, jetting, etc. Operations such as washing, stirring, bonding and peeling, all of which may generate static electricity. In general, the smaller the conductivity of the non-conductor (insulator), the more difficult it is to flow after the charge is generated, so the easier it is to be charged.


The problem of static electricity is particularly serious in clean rooms, because there are many process factors that generate static electricity in the clean room, and many materials in the clean room such as plastic floor, surface, throat, and work clothes have high resistance. It is very easy to generate static electricity and accumulate static electricity. Before the static electricity disaster of clean room was not taken seriously, these materials were widely used.