ROHS test report of anti-static mat
In order to allow customers to purchase environmentally-friendly anti-static table mats with more confidence, our company sent samples of green anti-static table mats for inspection this year. The third-party testing agency has tested that they meet environmental protection requirements. The third-party testing agency has confirmed that the third-party testing agency issued a ROHS test report and ordered anti-static table mats Look for Haiweida Airlines 2MM green.
Anti-static table mats In the electronics manufacturing industry, the demand for laying work surfaces and grounds is increasing. In order to meet the environmental protection requirements of anti-static table mats in various industries, we have developed odorless table mats, which are suitable for enclosed workshops. Anti-static table mats are required For effective grounding, the specific installation details are as follows:
When installing the environmentally-friendly anti-static table mat, the matching anti-static grounding buckle needs to be connected to the electrostatic grounding bus (the grounding bus must meet the standard), and it cannot be connected to the equipment grounding wire or the grounding wire of a three-phase circuit at will. The grounding wire has different functions and cannot be mixed. Regardless of the equipment grounding wire, the lightning protection grounding wire or the lighting grounding wire, they have their own balance point, so the workbench grounding buckle must be connected to a dedicated anti-static grounding The static electricity can be effectively discharged on the line. If it is not grounded as required, it may have a certain impact on the safety of employees.
Electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits and other microelectronics industries, warehousing and production workshops of flammable and explosive products, high-demand laboratories, various laboratories, server rooms, power distribution rooms and other special ESD protection sites In order to reduce or eliminate the influence of static electricity, it is necessary to lay anti-static table mats and floor mats. When the anti-static rubber is laid and grounded, the working surface will discharge the human body static electricity, so that the human body and the table surface contact ESD tweezers, tools, appliances, The instrument, etc. reach a basically uniform potential, so that the electrostatic sensitive device is not interfered by the electrostatic discharge phenomenon such as friction electrification, so as to achieve the effect of electrostatic protection.
The anti-static rubber table mat is mainly made of anti-static material and static-dissipative material synthetic rubber. Commonly used thicknesses are 2MM and 3MM thick double-layer composite structures, the surface layer and the bottom layer are both in a ratio of 1:1, that is, the static dissipative layer and the static conductive layer have the same thickness