Specifications Of Static Dissipative Coated Products

Jan 07, 2019 Leave a message

Specifications of Static Dissipative Coated Products

We make products utilizing an advanced Static Dissipative formula, blended from durable polymer materials that adheres to a variety of plastic substrates

COMPLIANCY

 Static Decay Meets MIL B-81705 when tested in accordance with

 Federal Test Standard 101B, Method 4046

 Resistance Meets ANSI / ESDA S20.20 and IEC 61340-5-1

 Regulated Chemicals Meets EU RoHS and China RoHS

PHYSICAL PROPERTIES

 Resistivity 10E6-10E9 ohms per square

 Contaminants No Chlorides, No Silicone

 Abrasion Resistance Coating exhibits resistance to abrasion that is similar to or better than that observed on bare substrate

 Solvent Resistance Coated panel was submerged in a 50/50 mix of isopropyl alcohol and water for 30 minutes to no effect

 Maintenance: coated surface can be cleaned with an 30/70 mix of isopropyl alcohol and water. Some Mat & Tabletop Cleaners can be used. Advise to test first