The cleaning of the ion fan is very important
A good ion fan, wants it to maintain good results for a long time, also requires the user to use the right and regular maintenance. The first is to clean regularly. The ion fan is used as a static elimination device. In the long-term use, the fan and the discharge needle will both contaminate the particles in the air. If the cleaning is not regular, the static elimination effect will be reduced, and the residual particles will be blown off. To the product. There are three aspects to cleaning:
(1) Chassis case: Regularly wipe the case with alcohol to avoid dust retention;
(2) Ion-emitting needle: Regularly use a brush to clean the discharge needle every week, four times a year, discharge needle alcohol wipe
(3) Ion fan: This is the place where dust is most likely to be accumulated, and it is also necessary to clean it regularly with a brush.
Note: These cleaning tasks will maintain parameters such as static elimination time and residual voltage for long-term stability.
2. General function detection: including whether the power indicator light, alarm light and related switch button are normally displayed (regular verification is subject to the operation instructions in the manual). This check can check the abnormality and find the problem in time to avoid the weakening effect of static elimination. Affect product quality
3. Electrical performance test: including ion balance test and static elimination time test (use static test analyzer, refer to the instruction manual). If it is found during the test that the static elimination time and residual voltage have a large deviation from the new machine, it needs to be sent back to the factory for commissioning calibration.