Static elimination solution on film
In the film production process, due to the existence of a large number of rollers, rubber rollers, and metal rollers, a large amount of friction of the insulating film material will be generated, which will generate high static electricity of up to 100,000 volts, which will seriously affect product quality, production efficiency and production safety. In high-speed applications such as slitting, slitting, coating, and rewinding, static electricity must be effectively eliminated.



General solutions for removing static electricity from films:
1. The environmental humidity should be adjusted higher.
2. Do a good job of grounding.
3. The staff wear anti-static gloves, shoe covers and overalls.
4. Use static eliminator: Static elimination equipment can generate positive and negative ions to neutralize the positive and negative charges on the plastic surface to achieve the effect of removing static electricity on the surface. The effect of using static elimination equipment is more direct and a one-time investment. It is currently widely used One of the methods.
We recommend using an electrostatic rod to remove static electricity. The surface of the film is flat and most of the film processing processes are automated production. The ion bar is beautiful in appearance and small in size. It has a wide range and rapid effect of removing static electricity. It is especially suitable for large, medium and small mechanical equipment. Fixing the electrostatic bar on the surface of the film does not need to be attached to the film, and the film passes through the electrostatic bar. The ion bar produced by our company can neutralize the static electricity on the surface of the film in about 0.2 seconds.

