Static knowledge



The main measures of static control include: static leakage and dissipation, static neutralization, static shielding and grounding, and humidification.
The breakdown damage of components caused by electrostatic discharge is the most common and serious electrostatic hazard in the electronics industry. It is divided into hard breakdown and soft breakdown. Hard breakdown is a one-time cause of dielectric breakdown, burnout or permanent failure of components; soft breakdown is caused by deterioration of device performance or decreased parameter indexes.
The transfer and storage of electrostatic sensitive components and printed circuit boards between processes in the production process must use anti-static loading boxes, component boxes, turnover boxes, turnover trays, etc. To prevent the accumulation of static electricity from causing harm. Electrostatic sensitive components and printed circuit boards must be packaged as finished products with anti-static shielding bags, packaging bags, packaging boxes, strips, baskets, etc., to avoid electrostatic damage during transportation.
In the production process of electronic products, the components and components of finished products often come into contact with, separate from equipment and tools, and generate static electricity due to friction. Anti-static cushions, turnover carts, maintenance kits, tools, work chairs (stools), etc. must be used, and Through proper grounding, static electricity can be discharged quickly.
Friction electrification and human body static electricity are the two major sources of hazards in the electronics and microelectronics industries, but the generation of static electricity is not the hazard. The hazard lies in the accumulation of static electricity and the resulting electrostatic charge discharge, so it must be controlled. An object with static electricity will form an electrostatic field around it, which will produce mechanical effects, discharge effects and electrostatic induction effects. Due to the mechanical effect of static electricity, floating dust particles in the air will be adsorbed on silicon chips and other electronic components, which will seriously affect the quality of electronic products. Therefore, anti-static measures must be taken to purify the working space.
The walls, ceilings and floors of the clean room should be made of anti-static and non-dust materials, and a series of electrostatic protection measures should be taken for operators, workpieces and appliances.
In order to understand the situation of static electricity during the production process, to determine the degree of influence of static electricity during the production process, and to inspect the quality of static protection products and equipment, it is necessary to measure static electricity and related parameters. The measurement of static electricity mainly refers to the measurement of static voltage, material resistance, grounding resistance, static turn-off period, static electricity quantity, static elimination performance, and surface density of cloth charge.
Electrostatic protection is a systematic project. Omissions or errors in any link will lead to the failure of electrostatic protection. It must be guarded from time to time, and everyone should guard against it.

