The benefits of the human body comprehensive tester with access control system
Nowadays, more and more electronics factories have higher and higher requirements for static electricity, and take adequate protective measures in all aspects.
Static electricity has the characteristics of concealment, randomness, complexity and severity. With the volume of electronic products
Production value and sensitivity to static electricity have increased year by year. “Risk management” has already become a very important
This can also fully explain why outstanding electronics companies in Europe, the United States, and Japan are implementing strict
Electrical protection control measures and the reasons that require its upstream and downstream suppliers to also fully cooperate.
The anti-static test access control networking system is a combination of static testing and electronic access control systems and computerized
Advanced products of management software; in many places where electrostatic protection areas (EPA) are set up, electrostatic footwear
The tests with electrostatic wristbands are all carried out by traditional manual login or supervision methods, which are not easy to implement.
Even with many mistakes, it is difficult to gain the trust of customers and management, and it is also caused by electrostatic grounding.
The huge potential loopholes of the anti-static access control system, aiming at these shortcomings, propose direct and effective solutions,
Ensure that when the operators enter the EPA area, they are actually prepared for the electrostatic grounding of the personnel; and combined
The three-roller gate is used as the control equipment of the pedestrian passage. It can provide an orderly and civilized way for people entering and exiting,
Put an end to illegal entry and exit, and quickly control the fall of the pole in an emergency, and organize the evacuation of personnel.
Introduction to use:
1. The personnel entering the production line of the workshop put on anti-static shoes and wrist straps, and stand on the static test pedal.
After inserting the wrist strap, put the personal identification card close to the credit card machine to do the identification of the static electricity test. Display 8 bits
Count the card number and then display the work number. The display shows that please press the tester and wait for the test result (waiting time is adjustable)
2. The personnel entering the production line of the workshop press the electrostatic button on the electrostatic tester to perform the electrostatic test.
And the result of passing or failing the electrostatic test is immediately displayed on the credit card machine.
3. When the test result displayed on the credit card machine is pass, the tester opens the triple roller gate or door lock, and
When the test result is NG displayed on the credit card machine, the personnel need to re-adjust and pay attention to
Only after passing the new test can you enter.