The characteristics of sticky mats and their usage in various fields
The general-purpose ordinary anti-static sticky mat is composed of multiple layers of polyethylene film, each layer is attached with a high-viscosity coating, which is very durable, can quickly and effectively remove sole particles and dust, and keep the working environment clean.
Before using the Hex sticky mat, you should first tear off the protective layer of the sticky surface from the opening on the reverse side, and then lay it flat on a clean floor without leaving any moisture. Press the sticky mat on the ground with the sole, and then tear off the protective layer from the opening on the front for easy use.
If the surface of the film is covered by dust during use, remove this layer from the opening so that the next clean film can be used. The sticky mat is made of processed materials and is highly viscous. It is used to purify dust and dirt on shoes in clean rooms and corridors with high requirements.
The blue pedal sticky mat is non-slip and pure, and will not be damaged by shoes or wheels. The new mucosa can only be used by tearing off the upper layer, no mop or washing is required. The bottom pad can be adhered to the ground and can be easily removed without leaving any traces. Each layer is the same size and will not be damaged or contaminated by cracks. The remaining amount is marked on the corners of the dustproof mat, it is not easy to remove the upper layer and tear off the contaminated layer after use. When people are walking on it or wheels are driving on it, the dust pad will stick to any dust attached to the heel or even the wheels. When a layer of sticky mat mucosa is covered by dust, it is peeled off and a new layer of mucosa is used under it, so cleaning and washing are not required.
With the development and expansion of the business, we can also customize the color and size according to the needs of customers.
Is the stickiness of the sticky mat the bigger the better?
This is not the case. The viscosity of the dust removal pad mainly depends on the applicable environment and the sole structure. Generally speaking, the entrance between the external environment and the clean room should be a sticky mat with a higher viscosity, and the buffer zone between adjacent clean rooms should be a sticky mat with a lower viscosity. This is because the higher the viscosity of the blue dust removal pad, the greater the possibility of residual glue sticking to the sole.