The Role Of Anti-static Tape In The SMT Splicing Process

May 05, 2021 Leave a message

The role of anti-static tape in the SMT splicing process

At present, with the rapid development of electronic component manufacturing technology, especially the miniaturization of components and the continuous improvement of integrated circuit integration, CMOS devices with a 0.15-0.25mm manufacturing process are widely used. Its breakdown voltage is usually between 50V and 100V. It has ultra-high-speed, high-frequency IC devices with higher integration and is more sensitive to static electricity. Some VMOS devices have a withstand voltage of only 30V, which imposes stricter electrostatic protection requirements for the production and manufacturing process of products containing the above-mentioned electrostatic sensitive devices.

In the manufacturing process of electronic products, electrostatic discharge can change the characteristics of semiconductor devices, causing damage or unstable performance, resulting in damage to the final product or failure of normal use. Relevant experts have made statistics, and the average product loss caused by static electricity is about 8-33%. The hazard of anti-static is so great, how to protect electronic products in the production process? Experts believe that the following aspects must be done:

   1. Anti-static on the ground;

  2, anti-static connection at work station;

  3, the grounding resistance is less than 4ohms;

  4. Temperature and humidity control: 20-30℃, relative humidity 30-70%;

   5. Ionizer, positive and negative ion wind;

   6. Human body electrostatic protection;

  7. The packaging adopts anti-static bag, anti-static box, anti-static box, etc.

   Through years of observation and research on the details of the electronic product manufacturing process, our company has in-depth understanding and found that many details of electrostatic protection need to be better in the SMT production process. For example, the cover tape of SMT material tape (CoverTaper) cannot reach the ideal anti-static resistance (105~8ohms), the SMT splice film is not anti-static, the cotton fiber packaging bag is not anti-static, and the steel mesh wiping cloth packaging bag is not anti-static. Static electricity, etc...These detailed phenomena that are not easy to attract attention are seen everywhere in the production process. The dynamic voltage generation is as low as thousands of volts, and as high as tens of thousands of volts, and these phenomena exist A great safety hazard for electrostatic breakdown.

In the second half of 2007, I finally found out that if the newly owned domestic superior project-anti-static tape technology, was applied to another traditional superior project "SMT splicing", we continued to explore these details and conduct special research. "Film", which combines the two into one, will better meet the requirements for electrostatic protection during the processing of the electronics manufacturing industry. However, during the implementation process, considerable difficulties were encountered. The difficulty itself is not the long-term anti-static, resistance value, temperature and humidity influence and friction resistance and other issues (these listed are the technical advantages of Kehongjian), and the biggest difficulty is the use of "SMT splicing film" In order to ensure the reliability of SMT non-stop splicing, this kind of tape is designed to achieve the highest adhesion. If there is an anti-static coating on the back of the tape, the adhesive surface of the tape will easily migrate the anti-static coating , That is, the tape sticks off the anti-static coating, which affects the stability of the anti-static. From the perspective of the structural characteristics of the anti-static tape (as shown in Figure 1), how to prevent the anti-static coating from being migrated by the adhesive surface? *It is important to firmly fix the anti-static coating on the base material of the tape to form a molecular chain. In response to this technical problem, the R&D team of Kehong will not be afraid of difficulties, give full play to its own technical advantages, combine advanced foreign technology, and pass thousands of matching experiments to *finally overcome this technical difficulty! In the first half of 2008, the "SMT anti-static splicing film" (as shown in Figure 2) has passed strict inspections by Huawei, Flextronics and other outstanding domestic and foreign companies, and reached a dynamic electrostatic voltage of <30V (as shown in Figure 3).


With the advent of the information society, electronic products will be more exquisite, reliable and miniaturized, and the requirements for electronic manufacturing processes will be more stringent. We are willing to work together with the majority of scientific and technological workers in the electronics industry to give full play to our own anti-static core technology advantages. Details, improve problems, overcome technical difficulties in the industry, do a good job of service, and meet the new challenges brought by high-quality, high-demand products!