The structure and instructions for use of the sticky mat
The sticky mat actually has 32 layers, 30 of which have a number label of 1-30 or 30-1 on the left or right bottom corner for easy replacement. The first layer is a composite of a non-glue PE transparent film + 29 layers of glued PE film (usually sky blue, other colors can be customized) + 1 layer of glued double-sided PE sky blue protective film. The first layer of the double-sided film is sky blue with a number label of 30 or 1. The second layer is a transparent non-glue PE film. Each of the 29 layers of glued PE film has a number label of 1-29 or 29-1.
Instructions for use of sticky mats:
First, tear off the protective layer of the adhesive surface from the opening on the back, then stick it flat on a clean and water-free floor, flatten the sticky mat on the ground with the sole of your shoe, and then tear off the protective layer from the opening on the front, and you can use it (if the surface of the film is covered with dust during use, tear off this layer from the opening, so that you can use the next layer of clean film). You can see that the first and third steps are transparent, which is what we call the protective layer. The protective layer is used to protect the cleanliness of the sticky mat before it is used. In addition to the protective layer, each layer will be marked with 1,2,3,4...30 in the corner in order, so that customers can replace it with a new layer after this layer is covered with dust.
Our company provides complete solutions and excellent technical service companies for users. The main products are dust-free clothing for touch screens, anti-static dust-free clothing, dust-free cloth, etc.