Those anti-static products
Preventing static electricity is very important for industrial production, but it is related to production efficiency and product quality, especially in winter, because the dry air in winter provides good conditions for the emergence of static electricity, so companies need to do antistatic . So what are the anti-static products in the market?
Component breakdown damage caused by electrostatic discharge is the most common and serious electrostatic hazard in the electronics industry. It is divided into hard breakdown and soft breakdown. Hard breakdown is a one-time breakdown, burnout, or permanent failure of component media; soft breakdown is a degradation of device performance or a decrease in parameter specifications.
During the transfer and storage of electrostatic sensitive components and printed circuit boards in the process of production, antistatic loading boxes, component boxes, turnover boxes, turnover trays, etc. must be used. To prevent damage caused by static electricity accumulation. When packing as a finished product, you must use anti-static shielding bags, packaging bags, boxes, baskets, etc. to avoid static damage during transportation.
During the production process of electronic products, the components and finished products of components often come into contact with, separate from, and friction with equipment and tools to generate static electricity. You must use anti-static cushions, revolving trolleys, repair kits, tools, work chairs, etc., and pass appropriate Grounding to discharge static electricity quickly.
Friction electrification and human body static electricity are two major sources of hazards in the electronics and microelectronics industries, but the generation of static electricity is not the hazard. The hazard is the accumulation of static electricity and the resulting discharge of electrostatic charges. The charged objects form an electrostatic field around them. There are mechanical effects, discharge effects, and electrostatic induction effects that must be controlled.
Due to the mechanical effect of static electricity, the floating dust particles in the air will be adsorbed on the silicon wafer and other components, which will seriously affect the quality of electronic products. Therefore, anti-static measures must be taken to clean the space. The walls, ceilings, and floors of the clean room should be made of anti-static, dust-free materials. A series of electrostatic protection measures should also be adopted for operators, workpieces and appliances.