What are the maintenance methods for different stages of the pool mat?
(1) Cleaning and maintenance after the ground rubber is laid down/before use
1. Remove dust and debris from the surface of the rubber.
2. Use a scrubber to add 3M red grinding disc or similar products to clean at low speed (diluted with strong universal cleaner 1:20 and added to the scrubber) to remove the protective wax, grease, dust and other surfaces of the non-slip rubber surface. Dirt, use a water suction machine to drain the sewage.
3. Wash with water and blot dry.
4. 1-2 layers of high-strength surface wax as needed.
Cleaner: Strong universal cleaner High-strength wax
Tools: Grinding Machine Red Grinding Machine Water Absorber Wax Tow Water Squeezer
(2) Daily cleaning and maintenance
1. Dust or vacuum cleaner to vacuum.
2. Wet drag. (Use the ground glue to clean the polish and dilute it with water 1:20 with a semi-wet mop.) If necessary, you can also use a scrubber with wash & shine for low speed cleaning.
Cleaner: Ground Drag Dust Cleaner Glue Cleaner
Tool: dust push mop
(3) Regular cleaning and maintenance
1. Dust or vacuum cleaner to vacuum.
2. Glue cleaning polish is diluted 1:20 with water, mopped or mixed with a high-speed polisher and a red grinder for grinding.
3. Upper 1-2 layers of high-strength wax.
4. If necessary, it can be polished with a high-speed polishing machine and a white polishing pad.
Cleaner: Glue Clean Polishing Agent High Strength Face Wax
Tools: Dust Push Grinding Machine Red, White Grinding Machine Water Absorbing Machine Wax Towing Water Press
(4) Complete renovation
1. Dust or vacuum cleaner to vacuum.
2. Dilute with a strong de-waxed water 1:10 and spread evenly on the ground. Wait for 5-10 minutes. Use a scrubber and a red grinder to clean and dewax at low speed. Use a water suction machine to dry the sewage in time.
3. Wash with water and blot dry until no residual detergent is left on the floor.
4. 1-2 layers of high-strength surface wax as needed.
Cleaner: Glue Clean Polishing Agent High Strength Face Wax
Tools: Dust Push Grinding Machine Red, White Grinding Machine Water Absorbing Machine Wax Towing Water Press
(5) Treatment of special dirt
1. Oil stain: Partial oil stain, the water-based degreaser stock solution is directly poured on the towel to wipe; large area oil stain, the Wei Te water-based degreaser is diluted 1:10, and the grounding machine is added with a red grinding disc to clean at a low speed.
2. Black offset printing: use spray cleaning and maintenance wax with high-speed polishing machine plus white polishing pad polishing treatment. For long-term black offset printing, the strong black offset remover can be directly applied to the towel for wiping.
3. Glue or chewing gum: Use a professional strong degumming agent to pour it directly onto the towel and wipe it off.
Detergent: Aqueous degreaser Spray cleaning wax Strong black offset remover Strong degumming agent.