What are the requirements for grounding detection of anti-static workbench
The grounding of the anti-static workbench is a very strict matter. It is necessary to do a comprehensive test to ensure its normal operation and avoid many accidents. Let's take a look at the requirements for the grounding test of the anti-static workbench.
1. Grounding specification requirements for anti-static workbenches
1. Lay the anti-static mat first, and then put the anti-static workbench completely and steadily on the anti-static mat, so as to ensure its safe and normal operation.
2. Secondly, the size of the anti-static workbench should be well measured. Pay special attention to the standards and specifications. It should not be too large or too small, otherwise it will affect the normal operation of the anti-static workbench.
3. Finally, before the grounding test of the anti-static workbench, it is necessary to plan the grounding wire in advance, because it will be very inconvenient to change it at will. After laying the grounding wire, check it to see if it is safe, only absolutely safe It can only be put into use.
2. Wiring specification requirements for anti-static workbench
1. When testing the grounding of the anti-static workbench, at least two anti-static wrist strap joints should be opened on the anti-static workbench mat. One of them is for the operator and the other is for the technology. The person and the person checking in are ready to use.
2. Plastic boxes, rubber, cardboard, glass, etc. cannot be placed in the archives on the anti-static workbench. These are static impurities and drawings, which may cause insecurity. In addition, the lock of the anti-static workbench is also To use anti-static materials.
3. The installer should directly touch the anti-static equipment. On the one hand, they must learn the grounding method of the anti-static workbench; on the other hand, they must also pay attention to wearing an anti-static wrist strap. The wrist strap is in good contact with our skin. Pay attention to the wrist strap. The resistance of the system to ground should be 1MΩ.
4. An anti-static test bench must be installed at the entrance of each production site, and everyone who enters the site must conduct an anti-static test, and only after passing the test can enter the site.
5. Various tools, assembly fixtures, inspection fixtures, welding tools and various instruments should be prepared at the production site to prepare for emergencies. In addition, when choosing a ground wire, be sure to choose a ground wire with good performance.
I have told you so much about the grounding test requirements and wiring specifications of the anti-static workbench. Everyone must be properly regulated during actual operation. In addition, when using the anti-static workbench, wipe with alcohol to prevent static electricity. The various parts of the workbench, so that it can be maintained and ensured that it can be used for a longer period of time.