Will the anti-static turnover car cause harm to the human body?
The anti-static turnover car has no harm to the human body. Generally, the anti-static PCB turnover car is divided into anti-static storage space (PCB board), steel frame, anti-static roller and (or) anti-static metal chain; static electricity passes through the anti-static roller and Metal chain release. The easiest way to install an anti-static turnover car:
1. First, connect an outer frame with 4 supporting round rods and tighten them with screws;
2. Put the required PCB slot plate on the round rod, pay attention to the single panel on the two ends, and the double panel on the middle;
3. Install another outer frame and tighten it with screws;
4. Install anti-static casters, which can be clamped with pliers;
5. Adjust the distance according to the size of the PCB board.
It does not mean that it is necessary. If the four wheels of the turnover car are all ESD, use a heavy hammer surface resistance tester, one on the car and one on the floor. If the test resistance is lower than 10 to the 9th power, it means the turnover Car to ground is OK.