Anlite anti-static mat
Features
Anti-static mats (floor mats) are mainly made of a variety of processes using conductive materials, static dissipative materials, and synthetic rubber. The mat has a long-lasting use, has good acid, alkali and chemical resistance, and is wear-resistant and easy to clean;
Laying anti-static mats to achieve a uniform potential and releasing static electricity for ESDS tweezers, tools, appliances, instruments, etc. that are in contact with the human body and the tabletop, and at the same time, the electrostatic sensitive device (SSD) is not interfered by electrostatic discharge phenomena such as triboelectric charging. The effect of static electricity protection.
The product is generally a two-layer structure, the surface layer is a static dissipative layer, and the bottom layer is a conductive layer. The surface layer is a static dissipative layer of about 0.3-0.5 mm thick, and the bottom layer is a conductive layer of about 1.5-1.7 mm thick.
Product parameters
[Product Specifications]: 0.8*10M*2MM, 1.0*10M*2MM, 1.2*10M*2MM
● Surface resistivity: 107-109Ω
● Underlayer resistivity: 103-105Ω
● Wear rate: <0.02g/cm2
● Static dissipation time: <0.1s
The main purpose
The production workshops and advanced laboratories of the microelectronics industry, such as electronic semiconductor devices, electronic computers, electronic communication equipment and integrated circuits, are mainly used for laying table tops, assembly line counters, shelves and floor mats, and are suitable for different conditions and different conditions. The needs of the environment.
1. Put the anti-static mat on the green side and lay it on the table.
2. Connect the grounding wire on the anti-static table pad to the dedicated ground wire. If there is no dedicated ground wire, it can be directly connected to the earth;
3, the operator is equipped with an anti-static wrist strap, clipped on the anti-static mat;
4. Place the parts on the anti-static mat to start operation.