​Answers to our Human Body Electrostatic Discharger asked by our current client

Apr 20, 2021 Leave a message

Answers to our Human Body Electrostatic Discharger asked by our current client

When the discharger it is not connected and is in the air, when we place our hand (or anything else) in the sensor it activates and before a few seconds it sends the green signal.

We think that if there is no connection, no earth cable or ground (because is in the air when we do this test) the system must not send green signal, but it does... it is like there is only a temporizer or a predetermined time when anything goes in the sensor, but it really does not makes any discharge.

Could you please confirm why?

After discussing with our engineer,I can explain the reason for you now:

Because the ground wires are short-circuited together with screws at the factory,So it forms a loop, the screws need to be removed before installation.

Here is the picture and video link for your reference.

http://taomsg-imvod.alicdn.com/5cnrPGxpNLMkHoTkGmB/am5FEMJGNc8Fv10DwIl.mp4