Anti-fatigue mat feature and laying method
Anti-fatigue mat is an anti-static product. This product can effectively reduce the
fatigue of the legs during long standing work, make the work easier and greatly improve the
work efficiency. So let's take a look at this anti-fatigue mat. What are the
characteristics? How to lay it?
First, let's talk about the characteristics of anti-fatigue mats:
1. Using advanced production technology, the static dissipative surface resistance is 10^8
-10^9 ohms, and the surface resistance of the conductive (static) layer is 10^3-10^5 ohms,
permanently preventing ESD, and the composite layer structure is effectively buffered. Foot
pressure, relieve fatigue; surface with anti-static warning mark, naturally forming an
anti-static protection zone.
2, good elasticity, restore power, close to the ground, unchanged.
3, the composite layer structure effectively buffers the foot pressure, greatly reducing
work fatigue.
4, easy to clean, easy to migrate, does not affect the normal working environment.
5, the surface is all black anti-slip design, resistant to dirt and wear, and resistant to
acid and alkali solvents, durable, safer to use.
6, anti-fatigue mat can isolate cold, reduce vibration, protect the products and tools
dropped during operation from damage.
7. Reduce production costs and improve employee health index and safety factor.
8, relieve blood circulation pressure in the foot, reduce body fatigue 50%, thereby
increasing work efficiency by more than 30%.
9, available in yellow, gray, green, can be customized according to customer needs.
Anti-fatigue mats:
1. Use local areas and processes within the working environment (such as several work
stations or several processes).
2, suitable for the transformation of the regional ground, is a simple and effective anti-
fatigue measures.
3, suitable for long-term standing position use (supermarket cash register, gas station,
workshop, laboratory)
Anti-fatigue mat laying method:
1. Basic ground requirements:
1 The basic ground can be water-grinding ground, porcelain ground, and wooden ground. 2 The
ground should be flat, no obvious unevenness, and the unevenness should be less than two
thousandths. 3 The ground needs to have sufficient strength, no sanding and shelling. 4 The
ground needs to be dry.
2. Construction procedures and specific methods:
1 Use 120# gasoline or xylene to clean the impurities on the ground (with a washing
machine); 2 use copper strips or aluminum strips for floor laying. If the thickness of the
copper strip is 0.02mm and the width is 30mm, the number of strips is determined according
to the actual requirements of the ground laying. Length and quantity, the end of the laying
copper strip is led to the ground. 3 After laying the grounding conductive mesh, clean and
dry the floor, apply conductive glue, dry for 20-30 minutes, until the hand is not sticky,
the bottom of the anti-static mat (black surface) is the same (coating conductive glue
once), then The anti-static rubber sheet is bonded to the ground, and then rolled by a
heavy roller for 5 times to make the surface of the anti-static rubber sheet neat and
straight, and can be used after 48 hours at normal temperature. 4 The ambient temperature
requirement during construction shall not be less than 25 degrees Celsius and the humidity
shall not be greater than that of ventilation. 5 Conductive glue liquid resistance
coefficient is not more than 108 Ωcm, peeling strength Kg / 2.5cm. 6 Conductive between
the gaps, can be coated with conductive glue, or attached to the surface of the copper
strip.
Well, today's anti-fatigue mat features and laying methods are temporarily
introduced here, if you have other things you don't know, you can add our QQ1194433178
consultation, we will be happy to answer your questions, thank you!