Anti-static rubber sheet
Anti-static rubber sheets are not much different from general rubber in appearance, but generally the thickness will not exceed 5mm, and they are generally in roll specifications. The color is generally divided into upper and lower colors, and the edges can be clearly seen. Layered boundaries. However, the above judgment method is only appearance, not absolute. The method that can really distinguish anti-static rubber sheet or judge its pros and cons must rely on corresponding instruments and experiments.
As an anti-static rubber sheet, the most basic requirement is that its resistance value must reach the standard, the point-to-point ground resistance of the upper color surface should meet the 1*10E6~1*10E9 ohm, and the point-to-point resistance of the lower black surface should meet the 1*10E3~1* Between 10E6 and 10E6 ohms, the system resistance is lower than 1*10E9 ohm. Only if the above requirements are met is the real anti-static rubber mat. The data requirement range of some high-standard products will be further reduced. Secondly, it must meet the relevant industry standards to be a qualified product.