Anti-static soles and side seams of dust-free boots should pay attention to matters needing attention
The staff of the dust-free purification workshop, in addition to wearing clean clothes, often wear clean boots. At this time, it is necessary to mention the anti-static sole of the dust-free boots. The anti-static sole of the dust-free boots has two kinds of solid and hollow.
Special attention must be paid to the use of hollow-bottomed dust-free boots, which are often cleaned and cleaned. After the hollow sole is cleaned and cleaned, the sole cannot be dried in time, and the breeding of bacteria will seriously affect the wearing. In addition, after the hollow sole is repeatedly cleaned several times, the insole and the sole are separated, which not only affects the wearing, but also affects the cleanliness of the dust-free purification workshop (the insole is made of cardboard, and the paper is not The impact of the dust purification workshop is very large).
Therefore, based on our many years of experience, it is best to use a solid-bottomed dust-free boot. After purging and cleaning, there is no phenomenon that the sole cannot be dried. There is no separation between the insole and the sole, but the side seam of the upper should be noted. If the requirements for cleanliness are relatively high, it is best not to use side seams when choosing a dust-free boot to avoid the opening and hairing of the suture during repeated cleaning and wearing, thus affecting the cleanliness of the purification workshop.