Clean room consumables can also be cleaned without dust
The initial large-scale application of the purification workshop is due to the increasing refinement of electronic products, and the corresponding consumables used in the purification workshop have also appeared. However, this kind of consumables can be regenerated and cleaned according to the usage conditions, so as to maximize the efficiency of use. At present, the strength company can provide customers with dust-free cleaning services for two types of clean consumables.
1. Purification gloves cleaning:
Generally speaking, gloves lower than the latex grade cannot be recycled and cleaned, mainly because of material and cost considerations, such as PVC gloves, the material is relatively sticky, it is not easy to clean, and the drying temperature is not easy to control, and the cleaning cost is higher than that of new gloves. , so it is not recommended. Compared with latex gloves, nitrile rubber gloves are more cost-effective for regeneration and cleaning. The nitrile material has strong high abrasion resistance, high perforation and good tensile strength, and can be washed and used repeatedly repeatedly.
Two, dust-free cloth cleaning:
In the purification workshops of the production of magnetic heads, semiconductors, chips, liquid crystal displays, circuit boards, optics and other industries, dust-free rags have been widely used to remove pollution from products, production equipment and clean rooms. The dust-free cloth can be put into regenerative cleaning, and the cleaned dust-free cloth can be put into the purification workshop of the corresponding level again. The dust-free cloth can be divided into polyester cloth, microfiber cloth, cotton cloth, non-woven cloth, etc., usually The dust-free cloths that can be recycled and cleaned are polyester and microfiber.