Clean room must require anti-static gloves
The clean room anti-static gloves are made of special polyester filaments, with conductive fibers and processed by special techniques. The anti-static gloves made of ultra-clean fabric not only have excellent anti-static function, but also prevent the fabric fibers from falling off. It is concluded that the clean room anti-static gloves need to have the following three characteristics, as follows:
1. Clean room anti-static gloves have anti-static function, and their anti-static effect must be durable and efficient, and will not be significantly attenuated due to daily washing and friction. 2, clean room anti-static gloves should have good dust filter, clean room dust mainly from indoor air and indoors. When the condition of the equipment is determined, improving the cleanliness means that the tiny dust generated by the human body is controlled to the inside of the clothes to let it pass through the fabric and enter the air. This is the so-called fabric with a high dust filter rate. Increasing the dust filter rate is at the expense of the breathability of the fabric, so knitted fabrics and woven fabrics that are relatively loosely woven are not suitable for use in clean rooms. 3, clean room anti-static gloves themselves do not dust: because it is worn in the clean room, so the fabric can not be used as a source of dust in the clean room, which determines that the ultra-clean fabric can only be produced with chemically synthesized long fibers . Natural short fibers such as cotton, hemp, silk, etc. cannot be applied to ultra-clean fabrics, although these materials can make the fabrics more pleasing. At the same time, it is required that the selected chemical fiber filaments should also strictly control the amount of dust generated. In general, full-dull polyester filaments are not suitable for woven antistatic super-clean fabrics. Because the matting agent added to polyester production, titanium dioxide, will become a source of pollution.
