Common sense of wearing anti-static four-eye shoes in summer
Many production workshops now wear anti-static shoes. In this hot summer, manufacturers will choose anti-static shoes with hollow holes, called anti-static four-eye shoes. Anti-static four-eye shoes can completely eliminate static electricity and are more comfortable, because the design is perfect in both the upper and the various layers of the shoe. Let me tell you some common sense of wearing anti-static four-eye shoes.
First, daily wearing matters
Under normal circumstances, anti-static shoes should be used with anti-static clothing products, must pay attention to waterproof, clean, moisture-proof, in the process of use, usually more than 200 hours, a resistance test It is assumed that the tested resistance cannot be used as an antistatic shoe if it is not within the specified range.
Materials
The anti-static shoes on the market now need more than just anti-static functions. At the same time, the material must also be able to suppress various dust generated by people walking around the workshop, so the selected material must be a low-incidence material. Most of them are made of PVC material or pu material to make soles, and the upper surface is integrally formed, and then reinforced on the line. The shoes made in this way look generous and strong, especially the anti-static shoes made of pu material, which have superior abrasion resistance. Compared with ordinary rubber shoes, the abrasion resistance is at least five times more.
Third, the occasion
Summer anti-static work shoes are usually used in the production workshops of various microelectronic industries such as electronic semiconductor devices, electronic communication equipment, electronic computers and integrated circuits, or in some advanced laboratories. The purpose is to eliminate or reduce the harm caused by static electricity.
Relevant standards
As an anti-static shoe, whether it is the design of the model or the structure of the inner and outer parts of the shoe, it should comply with the corresponding indicators. The surface layer including the shoes should be coated with conductive layers. All experiments are required. In addition, shoes should be stored in a dry and ventilated warehouse. To prevent mildew, they should be placed at least 0.2 meters away from the ground wall. The place. Leave all heating elements at least one meter away. In addition, be sure to avoid contact with acid oil or some other corrosive materials.
Five, deadline
From the day when antistatic shoes are produced, products over 18 months should be inspected in accordance with the standards, and only if they meet the requirements of official regulations can they continue to be used. During the wearing process of anti-static shoes, you should not wear any thick insulating socks or insulated insoles.