Does the stainless steel workbench simply have anti-static properties when covered with anti-static rubber mat?
Simple laying is not advisable, it requires a complete laying process to ensure the anti-static integrity of the entire workbench.
Laying method/process:
1. Determine the size of the anti-static table mat according to the needs of the work, and thoroughly clean the lower surface and upper surface of the table mat and various components with alcohol.
2. Lay copper foil tape under the anti-static table pad or install an anti-static grounding buckle on the table pad to pass through the table pad to ensure good contact.
3. Lay the prepared anti-static table mat on the work surface flatly, and determine the area for laying the anti-static floor mat according to the range of activities of the operator, and place the work table on the anti-static floor mat.
4. The anti-static safety workbench is grounded, and the anti-static bench pad and the ground pad are respectively connected in series with 1MΩ resistors to the ground wire configuration system with a multi-stranded copper core flexible wire or cable.