Electronic production workshops must wear anti-static shoes
The production environment of the electronics industry is increasingly demanding static electricity. Anti-static shoes are the necessary anti-static equipment for the production workshops and advanced laboratories of microelectronics, such as electronic semiconductor devices, electronic computers, electronic communication equipment and integrated circuits. The main role is to reduce the generation of static electricity.
In the past, many people didn't know too much about anti-static shoes. They thought that anti-static shoes are the same performance as the shoes that everyone usually wears. They can wear them in life and work. This understanding is wrong.
Anti-static shoes can not only eliminate the static electricity accumulation of the human body, but also prevent the electric shock of the power supply below 250V. However, the ordinary insulated shoes can not achieve this effect, even the conductive shoes have different points, the conductive shoes have Good electrical conductivity can eliminate the static electricity accumulation in the human body in a short time, and can only be used for anti-static protective shoes in places where there is no danger of electric shock.
Anti-static shoes should have anti-static insoles when worn, and work on anti-static ground to make the static electricity brought by the human body to the earth. Any part of the resistors passing or disconnecting will cause the human body to carry harmful static electricity, so it is important. The department should have a human body resistance tester to detect whether the shoes and insoles worn by the human body and the total resistance of the human body can meet the requirement of leaking static electricity. This is the main reason why people need anti-static shoes. For product safety, electronic production is recommended. The workshop wears anti-static shoes.
Why do you have to wear anti-static shoes when wearing an anti-static wrist strap? Both of them are designed to reduce the accumulation of static electricity and allow static electricity to be introduced into the earth. If the workshop operator has been sitting in front of the workbench, the anti-static wrist strap can play a good role in protection, but you still have a lot of time not working. Before the stage, the workers should walk around the workshop. If there is no anti-static shoes, the workers will generate high voltage during the walking process. When the anti-static wrist strap worn by the workers enters the workshop, the comprehensive tester test is still effective. During the process, the wrist strap fails. At this time, every time a worker touches an electronic component, it is likely to damage the breakdown and cause serious damage.