Equipped with static eliminator to help prevent damage to electronic products
With the continuous improvement of living standards, various electronic products have gradually become popular, but the requirements of high-end electronic equipment on the production process and production environment have become more and more stringent. Practice has proved that static electricity often causes damage to the production of the workshop and the quality of electronic products; for this reason, the electronic workshop workshop should be equipped with static eliminators to eliminate static electricity and improve the quality of electronic products.
In daily life, static electricity can be generated by walking, air movement, and handling. People generally think that only CMOS-type wafers are sensitive to static electricity. In fact, highly integrated electronic components and circuits are very sensitive. If all the components are damaged, they must be detected and eliminated during production and testing, and the impact will be small; if the components are slightly damaged, it is not easy to find under normal testing. In this case, it is often found to be damaged even when it has been used due to multi-level processing. Not only is it not easy to check, but also the loss is difficult to find. It takes much manpower and financial resources to find out all the problems. And if the malfunction is detected only during use, the loss may be huge. Therefore, it is recommended that in the dry autumn and winter seasons, manufacturers should configure static eliminators, which will help prevent damage to electronic products and improve the accuracy of electronic products.