FMX-003 Electrostatic Voltage Tester Instruction Manual

Aug 27, 2021 Leave a message

FMX-003 Electrostatic Voltage Tester Instruction Manual


The shell is made of anti-static material and has a grounding buckle to ensure that the measurement results are correct and reliable. The display has numbers and graphics that are clear and clear.

An ion balance measuring board can also be attached to measure the residual voltage of the ion generator with a measurable range of +/-200V.

Electric field measurement range +/-20Kv * 2 LED determines the working distance of 25mm

Can be equipped with ion balance measuring board (+/-200V)

FMX-003 electrostatic voltage tester has been upgraded to FMX-004 electrostatic voltage tester, the picture below is the actual picture

Single press to reset

Single press to show lock

Automatic shutdown when idle

Battery performance display

Function: Effectively detect the electrostatic charge of ESD workplace equipment, work surfaces and tools.

Features: LCD/level display test data, test data retention, digital clear display, high/low range.

Output: Red LCD shows positive charge, blue LCD shows negative charge

Measuring range: (0~±1.49kv low range), plus or minus 1kv-20kv (high range).

Test accuracy: ±10%

Power source: 9V

Accuracy: low range accuracy: plus or minus 0.1kv; high range accuracy: plus or minus 1kv

Input voltage: 9V, 6F22 manganese battery

Electrostatic field can be measured: +/-(0.00-20.0kV) (automatic display adjustment)

Standard distance measurement: 25mm+/-1mm

Ion balance can be measured: +/-(0-200V)

Measuring distance according to: ESD-STM3.1-2000 lonization standard

LCD display update: 5 times per second

Response time: 1 second

Working temperature and humidity: 10? 40 deg C/RH: 0? 60%R

Graphic display: positive: red / negative: blue

Acoustic alarm: power on / automatic shutdown when idle / beyond the measurable range

Automatic shutdown: idle for about 5 minutes

Measurement mode switching

Electrostatic field: single press the Power switch, there will be a beep

Ion balance (please install the ion balance measurement board first) Press Zero and Power at the same time, there are two beeps sounds

Weight/Volume 0.13kg/11.5cm*6.5cm*2.5cm (with battery)