How to eliminate the hidden danger of static electricity in the production of intelligent electronic products
It is well known that static electricity is harmful to any electronic product and has a great impact, so the top priority of the electronics industry is to be able to effectively prevent static electricity. Circuits are quite sensitive to electrostatic high voltages, and electrostatic discharge will occur when a person or object with static electricity touches these devices. When the electrostatic high voltage impacts the circuit, the internal oxide film will be broken down and destroyed, resulting in the electrical device being damaged on the spot or working abnormally. Of course, devices that have been subjected to electrostatic discharge will not fail immediately, which is why most people do not pay attention to electrostatic protection. So, how should we eliminate the hidden danger of static electricity? The following methods are for your reference.
1. Properly ground to discharge static electricity.
Anti-static grounding socket
2. Special attention should be paid to electrostatic protection during packaging and transportation of electronic devices.
Use an antistatic shielding bag
3. The operation or maintenance personnel should handle their own static electricity. As a computer operator, you should always keep in mind the hazards of static electricity, and try to avoid touching the internal boards of the computer. If you must touch the internal circuit, you should also add a grounding ring on your fingers to ensure effective discharge of static electricity.
Wear anti-static clothing, anti-static wrist strap, anti-static heel dai
4. Workplace electrostatic treatment. Conditional workplaces should be equipped with anti-static equipment as much as possible, such as anti-static floors, anti-static work chairs, etc., and maintain an ideal humidity of 40%-60%.
5. Improve the quality of the device itself and reduce the degree of electrostatic damage.
The damage of static electricity to electronic components is almost fatal and must be prevented. Therefore, enterprises should take protective measures in each part to minimize the loss as much as possible.