How to prevent static electricity in the factory workshop
For factories, the impact of static electricity is often inestimable, especially for electronics factories. If static electricity cannot be effectively controlled, not only will bad products flow to the market, but the entire order volume will be cancelled if serious, so anti-static Must start from the root cause.
1. The floor of the anti-static ground workshop must have a certain resistance value with the ground, so that the objects placed on the ground can discharge the static electricity on the ground to the ground, so it is necessary to lay special ground leather or paint to prevent Static paint.
2. Wear anti-static clothes and static shoes The personnel entering the workshop must wear anti-static clothes of special materials and anti-static shoes with a certain impedance, which can effectively discharge the static electricity generated during the activities of the workers.
3. Electrostatic wristbands Persons in contact with the product should wear special electrostatic wristbands to discharge the static electricity caused during the operation.
4. Install ion fan. Ion fan should be installed in the special station, especially the station where the product is frequently operated. The positive and negative charged ions blown by the fan will neutralize the static charge of the product itself.
5. The biggest role of the air shower room is to blow off the dust from people and avoid bringing them into the workshop. Of course, its setting should be determined according to the company's situation. The fan can also play a role.
6. Anti-static rubber Laying anti-static rubber on the workbench and the vehicle transporting products can effectively collect the static electricity generated during the operation and transportation, and release it to the ground through the ground wire.
7. Static grounding chain Set a grounding chain on the workbench and the vehicle transporting the product, and connect the grounding chain with the antistatic rubber, so that the static charge collected by the antistatic rubber can be discharged to the ground through the grounding chain.
8. All supplies in the workshop should be anti-staticized as much as possible. All items involved in the production of products must be anti-staticized. For example, the boxes containing the products and the tools used for product processing must be made of anti-static materials.