How to use anti-static table mat
1. Daily use of anti-static table mat:
1. Cleaning the surface of the anti-static table mat: generally use detergent to clean, pour a small amount of detergent into a basin with clean water, and then dip a clean towel into the water (pinch the towel dry slightly), and scrub the surface of the table mat (dust It can be cleaned); after scrubbing, if there is too much water on the countertop, just wipe it with a dry towel.
2. When cutting the anti-static table mat, release the length and width *1cm less, so that the product can recover for a period of time, and then trimming (to avoid non-standard size), the product is bonded to the workbench * It is better to use conductive glue, also You can use double-sided tape or water-soluble super glue (the glue can be used after 24 hours of bonding).
2. Laying method of anti-static table mat:
Lay an anti-static table mat (pasted with conductive adhesive) on the desktop, and then buckle one end of the anti-static grounding wire on the surface, and the other end is connected to the ground conductor, so that the static electricity collected on the desktop can pass through the anti-static grounding wire The principle of venting:
1. The green surface is for storage and absorption of static electricity around the desktop, and its resistance is 107~109Ωcm;
2. The black bottom surface is a conductor ≤106Ωcm, because it is a conductor, it can quickly discharge the absorbed static electricity;
3. One end of the grounding wire is connected to the anti-static table pad, and the other end is connected to the ground, so the static electricity is smoothly discharged to the ground through the grounding wire, so that the static electricity around the desktop is discharged through this principle.
In addition, the company has anti-static chairs, anti-static tapes, anti-static clothes, anti-static fabrics, anti-static shielding bags and other products. Welcome new and old customers to rest assured to buy their favorite products, we will serve you wholeheartedly!