How to use anti-static workbench mat correctly
When it comes to anti-static workbenches, I believe many people are familiar with it. For some industries and Co, it is used in daily life. It can not only bring great benefits to the electronic equipment factory and the assembly equipment factory, but also can greatly guarantee the safety of Co. Therefore, when some Co chooses anti-static workbenches, they use large quantities. To make a choice. So, how to use the anti-static workbench correctly?
1. How to use the anti-static workbench correctly?
1. When splicing the anti-static workbench, you must lay the anti-static mat in advance and place it on the anti-static mat, so as to ensure the safety performance of the anti-static workbench.
2. The size of the anti-static workbench should be measured in advance due to work needs. It is also necessary to ensure the accuracy of the measurement when measuring. If it is too large or too small, it will directly affect the operation of the anti-static workbench.
3. Since the construction of the grounding wire is very important, it can directly lead the static electricity into the underground, so it must be laid before installation. If the anti-static workbench is changed, it will cause inconvenience in operation. .
2. How to install the anti-static workbench correctly?
1. When installing the anti-static workbench, be sure to check the quality of the anti-static workbench in advance to ensure that there are no problems before installation.
2. Since the anti-static workbench usually needs to be placed on the anti-static floor mat, make sure to clean the anti-static floor mat before placing it. You can use special alcohol to wipe it.
3. When installing the anti-static workbench, be sure to note that there is a rotary joint under the front of the anti-static workbench, which can be directly passed through the bench pad and the foil tape, so that it can be fixed correctly, which is also beneficial The discharge of static electricity.
How to use the anti-static workbench correctly? Now everyone knows, before using the anti-static workbench, you must check the integrity of the power interface. If you find that there is a problem with the power interface, you must bring professional equipment for plug-in installation and work at the same time. During the process, it was found that the anti-static workbench had quality problems, and it should be connected with the after-sales service in time to ensure the completion of the machine maintenance.