How to use sticky mat
When using the sticky mat, first tear off the protective layer of the adhesive surface from the opening on the back, and then lay it flat on a clean floor with no traces of water entering or exiting. Press the sticky mat on the ground with the sole of the shoe, and then remove it from the front Tear off the protective layer from the opening and you can use it. If the surface of the film is covered by dust during use, remove this layer from the opening so that the next clean film can be used. The sticky mat is made of processed materials and is highly viscous. It is used to purify dust and dirt on shoes in clean rooms and corridors with high requirements. Remove dirt when touched. The new mucosa can only be used by tearing off the upper layer, no mop or washing is required. Can be used alone or in combination with the frame. The bottom pad can be adhered to the ground and can be easily removed without leaving any traces. Each layer is the same size and will not be damaged or contaminated by cracks. The remaining amount is marked on the corners of the dustproof mat, it is not easy to remove the upper layer and tear off the contaminated layer after use. Tear off the protective paper on the sticky mat to remove the adsorbed dust and impurities. When the adhesive surface of the dust-sticky silicone pad is seriously polluted and the viscosity drops, the next layer should be replaced in time to ensure the dust removal effect.