Installing anti-static floor mats
In the process of modern electronic component production operations, in order to reduce the impact on electronic products in the production site, more and more manufacturers install antistatic floor mats in the production workshop to solve such problems. The application of this new material effectively reduces costs and losses in the production process, and also improves the qualification rate of electronic products.
Installation environment of anti-static floor mat
In order to better play the role of the floor mat, we should choose to install the floor mat at an air temperature greater than 25 ° C, less than 60% humidity, and good ventilation. If the temperature is too high or the humidity is too high, the installation effect and use The effects will have an adverse effect.
The correct installation method
1. Install xylene in the washing machine to clean the floor that needs to be laid with antistatic mats, and lay the copper bars or aluminum bars of the measured quantity and length on the floor according to the requirements of the floor laying. In this process, To allow static electricity to go underground, one end of a copper or aluminum bar must be led to the ground.
2. After the copper bar or aluminum bar net is laid, clean and dry the ground and apply anti-static electric glue liquid.
3. Wait for about half an hour. When the anti-static adhesive is not sticking to your hands, stick the anti-static mat and the ground together. Roll or beat with a roller or hammer to make the two surfaces straight. You can use it with confidence in the future.