Is it beneficial to use metal carts to protect static sensitive panels during production?
If you need to protect your panels containing static sensitive components, the first step should be to eliminate the use of metal carts and replace them with static dissipative carts.



As an alternative measure, it is recommended: first ground the metal cart with a metal chain (provided your floor is also dissipative or conductive). Second, you need to make sure there is an electrical connection between the uprights on the turntable and the shelves. Third, put an anti-static tray or lay a layer of anti-static table mat on each shelf, and put the conductive layer down in contact with the metal shelf. And use the ground wire to connect the table mat with the shelf. The boards containing electrostatic sensitive devices are placed in trays or placed on the surface layer of table mats. Note that static sensitive panels should not be placed close to any part of the metal cart as this may cause electrostatic discharge.

