Knowledge of anti-static shoes
Due to the continuous development of the domestic economy and technology, the sales of antistatic products have greatly increased, and there are many varieties of antistatic products, such as: antistatic clothing, antistatic gloves, antistatic shoes, etc. Point to prevent static electricity. We all know that static electricity is definitely harmful to the human body. If the human body stays in the static environment for a long time, it will cause headaches, chest tightness and other symptoms, and it will aggravate the patient's condition and affect the patient's recovery. At this time we will try our best to get rid of static electricity. Under normal circumstances, anti-static shoes are often used in electronic technology, petrochemical industry and other industries. But some common sense questions about anti-static, many people should not be very clear, the bottom editor will take you to understand some of the introduction of anti-static shoes?
1. Anti-static shoes are work shoes worn by micro-electronics manufacturing workshops and advanced laboratories of electronic semiconductor devices, electronic computers, electronic communication equipment, and integrated circuits to reduce or eliminate static electricity hazards. Anti-static shoes may wish to guide static electricity from the human body to the ground, thereby eliminating static electricity from the human body, and effectively suppressing the dust generated by staff walking in the clean room. Suitable for pharmaceutical plants, food plants, electronics plants clean workshops, test rooms, etc.
2, anti-static shoes are usually called static shoes, anti-static work shoes. Cotton can be divided into two categories: anti-static shoes and anti-static slippers. At present, almost all the anti-static slippers are used in summer, so they are slightly less than anti-static shoes in application. However, depending on the working environment, you can use any kind of antistatic shoes. The style of anti-static shoes can be basically divided into: 1. Low-top shoes: mid-toe shoes (full shoes), hole (eye) shoes, mesh (face) shoes, steel toe caps, etc. 2. Sleeve boots: soft bottom boots, hard bottom boots, etc. 3. Anti-smashing shoes: steel toe cap shoes.
In addition to anti-static shoes, anti-static shoes, work shoes have good wear resistance and non-slip function, so they are often used in electronics, petrochemical industry and other industries. All of these industries are affected by static electricity. For example, in the electronics industry, static electricity can damage electronic components and cannot be used normally. In the petrochemical industry, some safety incidents can be caused by a little static electricity. However, anti-static shoes can release the static electricity generated by the human body and reduce the occurrence of static electricity. Therefore, the use of work shoes may be useful to prevent the occurrence of static electricity, and it can also deal with some of the confusion caused by static electricity. A unique point of concern is that anti-static shoes should also be paid attention to in terms of scrubbing. You cannot use chemical solvents to scrub. It is best to use a neutral solvent to scrub, and then use a soft brush to quietly test it.